Carbide plate is one of the many tungsten steel materials, the use of metallurgical methods by milling, milling, pressing, sintering, different uses of carbide plate in the WC and Co composition of the content is not the same, the use of High resistance, good chemical stability (acid, alkali, high temperature oxidation), Carbide Board low impact toughness, low expansion coefficient, high hardness, high wear resistance, high elastic modulus, high compressive strength, good chemical stability , Thermal conductivity, Carbide Board conductive and iron and its similar characteristics of the alloy. But also the production of high temperature parts, wear parts, anti-shielding parts, corrosion-resistant parts of the excellent material. When used in accordance with the specific choice of materials should be appropriate carbide plate.
Carbide plate has excellent toughness, high hardness, good wear resistance, high elastic modulus, high compressive strength, good chemical stability (acid, alkali, high temperature oxidation), low impact toughness, Carbide Board low expansion coefficient , Thermal conductivity, conductive and iron and its similar characteristics of the alloy, because the tungsten steel turning tool has great advantages, it quickly in the industry to be promoted. In a short period of 50 years, due to the use of tungsten steel turning tools, the metal cutting speed increased by two hundred times, from ten meters per minute to more than two thousand meters. Carbide Board Heat-resistant tungsten steel still maintains good elasticity and mechanical strength, generally used for thicker cutting, intermittent cutting and poor parts clamping. After coating the effect is better, can be processed to HRC50 °Carbide Board of various types of materials. Corresponding to the general tungsten steel, with 1 to 2 times the service life and excellent impact resistance.